33
Call
SH-01Q_E_04.fm
[33/37]
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
Receive the call
:
Operate after touching [Activate].
1
Reject call with SMS
You can reject an incoming call and send a selected SMS
message to the other party.
2
Reject
You can reject the incoming call.
3
Accept
You can receive the call.
3
[End] to end the call
■
Placing a call on hold
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
[
z
]
/
[On hold]
■
Answering by answering memo
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
[
z
]
/
[Absence Memo]
Playing an answering memo
1
In the home screen, [
]
]
/
[
z
]
/
[Call settings]
2
[Call/Ans Memo]
/
[Answering Memo List]
/
select an answering memo
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the using
condition during a call.
1
Add call
*
Place a current call on hold and make a call to another party.
2
End
End a call.
3
Dialpad
You can enter touch-tone signals.
4
Hold
Hold/Unhold a current call.
If you have added a call, [Switch] is displayed. Touch it to
switch to whom you talk.
5
Mute
Enable or disable mute setting on a current call.
6
Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch sound
emitting parts.
* Subscription to Call Waiting Service is required.
■
Adjusting the in-call volume
1
[
x
]/[
y
] during a call
2
[+]/[-]
:
Alternatively, touch [
x
]/[
y
] to adjust the volume.
3
[Close]
■
Using Noise suppression
When Noise suppression is set to [ON], you can measure ambient
noises using the out-microphone and communicate by making your
voices sound clear during a call.
1
[
x
]/[
y
] during a call
2
[OFF]/[ON] of Noise suppression
3
[Close]
■
Using Slow Talk
When Slow talk is set to [ON], the speed of the other party’s voice is
slowed down during a call and you can hear the voice well.
1
[
x
]/[
y
] during a call
2
[OFF]/[ON] of Slow talk
3
[Close]
[Calling Method]
When calling to a land-line phone: 010
/
country code
/
area
code (city code)
/
the other party’s phone number
/
[
0
]
When calling to a mobile phone: 010
/
country code
/
the other
party’s phone number
/
[
0
]
･
As for the other parties’ phone numbers and area codes (city
codes) that begin with “0”, omit the first “0” when entering
(except some countries or regions such as Italy).
･
Alternatively, enter “009130-010” as usual or “+” instead of
“010”.
Receiving a call
Operation during a call
Incoming lamp
Note the following to use hands-free.
･
Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
･
When calling outdoors, in a location where surroundings are
noisy and where the sound echoes loudly, use an earphone/
microphone.
･
If the sound breaks up during a hands-free call, lower the
in-call volume.
Noise suppression processes voices to make conversations
sound clear. Sound quality may vary depending on the
surrounding noises and the tone of the voice.
When using Noise suppression, make sure not to cover the
hole of the out-microphone and move the mouthpiece as close
to your mouth as possible for speaking.
SH-01Q_E.book 33 ページ ２０１３年１２月１８日 水曜日 午後３時２３分
