31
MAINTENANCE
1. CLEANING
Follow the instructions in the table below and perform cleaning during repair.
2. LIST OF PARTS TO BE REPLACED
The following list is based on standard situation and it differs according to the environmental and usage conditions.
When appropriate maintenance and inspection are not performed, the life span of the parts will be greatly reduced and
it may also affect other parts. When rubber and sponge parts are kept for long periods of time without using, they may
change shape and deteriorate.
No
Cleaning parts
Cleaning method
1
Card transport roller
Clean the roller surface with alcohol (absolute alcohol).
* Except heat roller
2
Fan filter
Use vacuum cleaner to suck dust.
3
Cassette shaft
Clean the dirt on the shaft with alcohol (absolute alcohol).
4
Card guide base
Clean the card guide surface with alcohol (absolute alcohol).
5
Bobbin inner
Use vacuum cleaner to suck dust.
Part number
Part name
Estimate time for replacement
Remarks
KLA5005-121
Halogen heater
2,000 hours
KJV46484-001
Fan filter
About 2 years
Depends on the usage environment
QAR0445-001 (KEF1043)
Air intake fan
40,000 hours
QAR0429-001 (KEF1037)
Card cooling fan
20,000 hours
Only during laminating
CL-500-M01
Heater pressure motor
200,000 screens
CL-500-M01
Ink reeling motor
100,000 screens
QAR0444-001 (KBM1036) Card transport motor
200,000 screens
CL-500-HR1
Heat roller
200,000 screens
MAINTENANCE
Содержание CL-500
Страница 12: ...8 REMOVING MAIN PARTS...