DNP CL-500, Руководство по обслуживанию

Страница: 21 / 60

17
MECHANISM OPERATION
MECHANISM OPERATION
Card transport motor
Film reeling motor
Heater cam motor
Card insert detection sensor
Laminate position sensor
Card ejecting sensor
Film (Black) mark sensor
End mark sensor
Heat roller pressure position sensor
Heat roller standby position sensor
Lo
Up
Off
Down
Off
Fwd
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
Off
Rvs
Hi
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
Hi
Lo
1. INITIAL OPERATION
Initial Operation when Power On
1. Stop every motor and turn off the heater.
2. Return the heat roller to the initial position.
3. Check the status when the power is turned off.
4. Check the film is installed.
5. Check the number of rotations of the film reeling
motor.
6. Turn on the heater.
Stop at this point when an error has occurred.
2. LAMINATING OPERATION
1
Stage: Card feeding operation
When a card arrives at the card insert detection
sensor, the card transport motor is rotated in the
exit direction. When the card exits the card insert
detection sensor, a fixed length card is transported
and stopped.
2
Stage: Film position setting operation (when
patch film is installed)
The film reeling motor is rotated in the reeling di-
rection and stops when the film (black) mark sen-
sor detects the film (black) mark.
3
Stage: Card laminate position setting operation
The card transport motor is rotated in the exit di-
rection and stops when the card exits the laminate
position sensor and after moving the offset card.
4
Stage: Heat roller pressing operation
The heater cam motor is rotated and stops when a
slit arrives at the heat roller pressure position sen-
sor.
5
Stage: Laminating operation
The card transport motor sends out the length of
film to be laminated and rotates in a laminating
speed in the exit direction.
At the same time, the film reeling motor rotates in
the reeling direction according to the laminating
speed.
6
Stage: Heat roller separation, film peeling op-
eration
The heater cam motor rotates and stops when the
heat roller standby position sensor detects a slit.
At the same time, it transports the card in a fixed
length and stops.
At the same time, when the end mark sensor de-
tects a film (black) mark, the film reeling motor stops.
(when patch film is installed)
The film reeling motor stops accordingly when the
card transport motor stops. (when overlay film is
installed)
7
Stage: Card ejecting operation
The card transport motor rotates in the exit direc-
tion and stops after the card exits the card eject
sensor.