DNP CL-500, Руководство по обслуживанию

Страница: 19 / 60

15
USING SERVICE MODE
PC
CL-500
LAMINATOR
(DSUB9)
PRINTER
(DSUB9)
USB
CX-120
(CX-1** series)
(Back view)
3.2 Connecting with CX-120 and CX-1** series
(1) Connect the laminator and printer with the Laminator communication cable same as usual.
Fig. 2
(2) Turn on the power of laminator.
(3) Turn on the power of printer.
(4) Wait the situation of the printer turned to READY and laminator turned to PREHEAT or READY.
(5) Update the firmware (Lami***.icf) with printer status monitor.
While handling update, laminator can’t display it’s status on the front panel.
<CAUTION>
It takes about 1 ~ 2 minutes to finish the procedure of download. Don’t turn off the power of laminator and printer.
(6) After complete the download correctly, the laminator start the initialize by itself and LCD display of printer change to
“Download Ready” .
(7) Turn off and on the power of printer to replace the version information saved in the printer.