DNP CL-500, Руководство по обслуживанию

Страница: 37 / 60

33
ASSEMBLY DIAGRAM AND PARTS TABLE
ASSEMBLY DIAGRAM AND PARTS TABLE
Important
Symbol indicates that safety issues are important for this part. When replacing parts, always use the specified part
for safety reasons.
Do not supply parts not described in the parts table or parts displayed with a - sign in the parts column.
Parts for repair are at standard price (exclusive of tax). This price may change together with market changes.
The manufacturer and electricity version label is on the rear panel. As there may be parts that are not compatible,
check the version described on the label when ordering parts.
For example, the revision number in the parts table is “M-B4” or “E-A3”.
MECHANICAL REV.
A
1 2 3 4 5 6 7 8 9
B
C
ELECTRICAL REV.
A
1 2 3
KXL46623-001
4 5 6 7 8 9
B
C
Electrical Rev.A2 Electrical Rev.A3
Firmware Ver.017 Firmware Ver.018 Firmware Ver.0.17 Firmware Ver.018
Mechanical
Can be used Can be used Cannot be used Can be used
Rev.A3
Mechanical (Can be used) (Can be used)
Cannot be used
Can be used
Rev.A4 Not recommended Not recommended
(Silence effect can be
achieved with this com-
bination only)
Cautions on each revision
There are restrictions on version compatibility in the following electrical revision and firmware:
When the electrical revision is renewed due to main board exchange, make sure to update the firmware version to
the latest one.
There are restrictions on mechanical revision, electrical revision and firmware version as follow. To maintain the
performance of this unit, use main board which electrical revision is Rev.A3 onwards with mechanical revision Rev.A4,
and make sure to download firmware Ver.018 onwards.
Main board Firmware version
Electrical revision
Before A2 TPS0236-001 (TPS0236-1) Ver.017 or Ver.018 can be used
A3 TPS0236-002 (TPS0236-2) On
and after V
er.018 can be used