DNP CL-500, Руководство по обслуживанию

Страница: 17 / 60

13
USING SERVICE MODE
2. SERVICE MODE
Entry method:
When the machine is in preheat, ready or error state, press the EXIT, MENU, then release the MENU button first to go
into Service Mode.
Does not enter Power Save mode
Enters Power Save mode after the machine is in Ready state for 10 minutes
Enters Power Save mode after the machine is in Ready state for 20 minutes
Enters Power Save mode after the machine is in Ready state for 30 minutes
Enters Power Save mode after the machine is in Ready state for 60 minutes
The card cooling fan does not rotate when laminating
The card cooling fan rotates when laminating(Air flow:Full)
LCD contrast is deepest
LCD contrast is palest
Film (Black) mark sensor sensitivity setting
Standard setting : 1
0
1
2
3
0
0.5
1
2
3
1
1.5
2
4
5
LCD Contrast
Cleaning
Mk.SensLvl
Temp+Gain
Temp-Gain
0.5
1
1.5
2
Printer
CX210
CX-120
Number of rotations of film reeling motor
(rpm)
Number of
rotations
Motor-N
Total
60
10
20
30
Off
Power Save
Off
Full
Card Fan
Cleaning of transport roller (heat roller is not pressed)
Cleaning of heat roller (heat roller is pressed)
Without HR
With HR
10sec
Cool Time
0sec
5sec
7sec
Setting value Setting Items
Not used, HR2, HR1, Black mark, End mark, Card exit, Laminate position, Card entrance
Card transport motor rotates
The patch position of the card is towards the left
The patch position of the card is towards the right
Shifting to the next setting moves the patch position by approx. 0.17mm.
Film reeling motor rotates
Press the heat roller and return to standby position
Heat roller thermistor output (hex decimal number) Film Motor
Cam Motor
Card Motor
Sensor
Card Offset
Motor
Temp
Ver
7
6
+ Adjustment gain of the set interior temperature adjustment for heat roller temperature
Standard setting : 2
- Adjustment gain of the set interior temperature adjustment for heat roller temperature
Standard setting : 1.5
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
Low
Half
High
The card cooling fan rotates when laminating(Air flow:Low)
The card cooling fan rotates when laminating(Air flow:Half)
The card cooling fan rotates when laminating(Air flow:High)
H.Time
H.Time Init
∗∗∗
Connect CX210, CX-320 and CX-3** series
Connect CX-120 and CX-1** series
Laminated panels
Firm ware Version
Heated hours
Initializing heated hours
This setting value will be neglect
and give priority to the setting of
the connecting printer.