DMP Electronics 734N-WIFI, Инструкция по установке и программированию

Страница: 25 / 44

Digital Monitoring Products, Inc. | 734N-WIFI Installation and Programming Guide 21
RELOCK ON ZONE 2 CHANGE
Selecting
YES
turns the relay off when zone 2 changes
state. Selecting
NO
leaves the relay on when zone 2
changes state. Turning off the relay at Door Closed allows a
long strike time to be automatically ended and relocks the
door. The default is NO.
ACTIVATE ZONE 3 REQUEST TO EXIT
Selecting
YES
activates the zone 3 Request to Exit (REX)
option. Selecting
NO
allows standard zone operation on
zone 3. Default setting is
NO
.
Connect a motion sensing device or a mechanical switch to
zone 3 to provide REX capability to the system.
When zone 3 shorts, the on-board Form C relay activates
for the programmed number of seconds (see zone 3
REX Strike Time). During this time, the user can open the
protected door to start the programmed zone 2 bypass
entry/exit timer. After the programmed number of seconds,
the relay restores the door to its locked state.
The 734N-WIFI module provides a bypass-only option for
REX on zone 3. When zone 3 OPENS from a NORMAL state,
only a bypass occurs: the on-board relay does not activate.
This bypass-only option uses two methods of REX.
The first REX device provides the programmed bypass
entry/exit timer. The second REX unlocks the door.
RELOCK ON ZONE 2
CHANGE?
NO YES
ACTIVATE ZONE 3
REX?
NO YES