DMP Electronics 734N-WIFI, Инструкция по установке и программированию

Страница: 19 / 44

Digital Monitoring Products, Inc. | 734N-WIFI Installation and Programming Guide 15
PROGRAM THE 734N-WIFI
When you program a 734N-WIFI, you can use a keypad connected to the 734N-WIFI
programming header and set to address 1. For 12 Volt applications, connect the keypad to
the module using a Model 330 4-wire harness. For 24 Volt applications, connect the keypad
to the module using a Model 330-24 4-wire programming harness with in-line resistor.
Do not connect a keypad using a standard Model 330 harness if using a 24 volt
power supply! Damage to the keypad could occur.
You can also program the 734N-WIFI from an XR150/XR550 Series panel. If you choose
to program the 734N-WIFI from the panel, all future programming should be performed
through the panel. The panel’s programming overrides any programming performed from a
keypad connected to the 734N-WIFI.
While the 734N-WIFI is in programming mode, it will not be able to communicate with the
panel.
PROGRAM START DISPLAY
When you connect the keypad to the 734N-WIFI module,
the version number and release date display. Press CMD to
enter the Programming Menu.
INITIALIZATION OPTION
These options can set the 734N-WIFI module programming
memory back to factory defaults. Press any select key or
area to enter the initialization menu.
734N PROGRAMMING
VER VVV MM/DD/YY
INITIALIZE ALL?
NO YES