DMP Electronics 734N-WIFI, Инструкция по установке и программированию

Страница: 14 / 44

10 734N-WIFI Installation and Programming Guide | Digital Monitoring Products, Inc.
The 734N-WIFI provides direct 12/24VDC, 200mA output to the reader on the RED
terminal connection. Figure 8 shows a reader with wire colors RED , WHT , GRN , and
BLK connecting to terminals 1, 2, 3, and 4.
The green wire carries Data Zero (D0), and the white wire carries Data One (D1). The
red wire connects 12/24VDC, 200mA maximum power and the black wire is ground.
The wire colors may be different depending on the reader being installed. Refer to the
literature provided with the reader for wire coding, wire distance, cable type (such as
shielded), and other specifications.
Card Reader LED Operation
To provide visual indication of a valid card read, the card reader can be wired to
illuminate the green LED for the duration of the door strike.
Connect the orange or brown wire to terminal 5 to have the green LED stay on for the
duration of the relay activation.
Card Reader Annunciation
Connect the yellow wire to terminal 6 to have the remote annunciator turn on anytime
the panel instructs the 734N-WIFI on-board piezo to turn on.
6
CONNECT A CARD READER
(optional)