DMP Electronics 734N-WIFI, Инструкция по установке и программированию

Страница: 6 / 44

2 734N-WIFI Installation and Programming Guide | Digital Monitoring Products, Inc.
FORM C RELAY
The 734N-WIFI’s Form C relay draws up
to 35mA of current. Refer to the NC/C/
NO (Dry Contact Relay) and the Isolation
Relay sections in this document for more
information.
PROGRAMMING
CONNECTION
The 734N-WIFI also provides a keypad
programming connection that allows you to
use a standard DMP LCD keypad for initial
setup. Programming can be completed
using a keypad connected to the
734N-WIFI, or from XR150/XR550 or
XR150INT/XR550INT Series panels.
KEYPAD IN AND OUT
CONNECTIONS
The keypad in (KYPD IN) connection
receives and transmits data to the panel
keypad bus or AX-Bus™.
The keypad out (KYPD OUT) connection
receives and transmits data out to other
keypad(s) or module(s). Install a dual
connector four-position harness to allow
daisy chain connection to other devices, up
to the maximum number of devices
supported. XR150 Series panels support up
to 8 devices. XR550 Series panels support
up to 16 devices.
When the 734N-WIFI is powered
from 24VDC, do not connect devices
to KYPD OUT header.