9024-065-Q-8-16
36
7.4 Accessory Items
UL 325 Monitored Entrapment Protection Devices available for the model 9024 swing gate operator.
Type B2 Contact Sensors (Reversing Edge)
Miller Edge Sensing Edges - all models with a T2 (resistive) termination.
Miller Edge Monitored Gate Link Model MGL-K20
Type B1 Non-contact Sensors (Photo Cell)
Miller Edge Reflective-Guard Model RG
Miller Edge Prime-Guard Model PG
EMX Industries Model IRB-MON
EMX Industries Model IRB-RET
Omron Model E3K-R10K4
Seco-Larm Model E-931-S50RRGQ
Seco-Larm Model E-931-S33RRGQ
Seco-Larm Model E-960-D90GQ
Type B1 Non-contact Sensors (Photo Cell) requires DK P/N 9200-190 Photocell Resistor kit
MMTC Model IR55
MMTC Model 60-278
Carlo Gavazzi Model PMP12
Carlo Gavazzi Model 8080-031
Monitored Expansion Kit
Miller Edge Multi-Input Module Model MIM-62
Accessory items available for the model 9024 slide gate operator.
Contact Sensors
- For use as a external safety protection device. Miller Edge, Inc., MGO20, MGR20, MGS20
Photo Cell
- Non-contact (photocell) sensors for use as external safety protection.
MMTC, Inc. Model IR55 - P/N 8080-010 Allen Bradley - P/N 8080-011
Carlo Gavazzi Type PMP12 - P/N 8080-030 Carlo Gavazzi Type PMT - P/N 8080-031
Loop Detector
- Detectors plug directly into ports on circuit board simplifying wiring.
Single channel detector - P/N 9410-010 Dual channel detector - P/N 9409-010
Loop Wire
- 18 AWG loop wire with XLPE insulation is ideal for ground loops. Available in 500 and 1000 foot rolls. Red, blue or black
insulation.
Pre-Fab Loops
- Prefabricated ground loops. 24-foot circumference with 50-foot lead-in. Available in yellow, red or blue jackets. Not for use in
asphalt roadways.
Loop Test Meter
- Meg-ohm meter checks the integrity of ground loops. P/N 9401-045
Time Clock
- 7 day and 365 day time clocks can be used to automatically open gate at pre-set time and days. Compact clock fits inside the
operator. 7 day clock - P/N 2600-791 365 day clock - P/N 2600-795
115 VAC Heater with Fan Assembly Kit
- Thermostatically controlled heater and fan for cold and hot environments.
For 115 VAC input power ONLY. P/N 1601-154
208/230 VAC Heater with Fan Assembly Kit
- Thermostatically controlled heater and fan for cold and hot environments.
For 208/230 VAC input power ONLY. P/N 1601-197
V-Wheels
- 4 inch and 6 inch. UHMW or Steel. Roller bearings or sleeve bearings. Single or tandem wheel configurations.
Endless Idler Assembly with Protective Cover
- Use when gate operator chain needs 180° return. P/N 2600-818
Guide Rollers with Protective Covers
- A variety of sizes to support slide gates.
Gate End Retainer
- Fits on top of end post and helps stabilize the end of the gate in the open or closed position (End post NOT provided).
P/N 1204-004
Post Mount Kit
- Required for post mount installation. P/N 9000-015.
Chain Tray Kit
- 10 Ft. section. Sections connect together to fit any length gate. P/N 2601-270
Additional #40 Chain
- 20 ft. per box. P/N 2600-442
Surge Devices
- High and low voltage surge suppressors help prevent circuit board failure caused by lightning strikes and power surges.
High Voltage - P/N 1876-010 Low Voltage - P/N 1878-010
Speed Bumps
- Prefabricated six-foot speed bump reduces traffic speed through gate system. P/N 1610-150
Standard Battery
- 12 Volt 7.2 Amp/Hr. P/N 1801-003. Two (2) required.
12 Volt 18 Amp/Hr Extended Battery
- P/N 1801-004. Two (2) required.
