Diver6 User Manual
Section 5: Page 48 of 87
Dive Master will be logged back in as the dive continues to be monitored. This will ensure that both parties
properly perform the handoff and responsibility is passed on to the new Dive Master.
Dive Plan
The Dive Plan screen (Figure 35) allows a Dive Master to configure the dive details and dynamically
manage personnel in the operation. Note: Please make sure that your Topside and GPS comms are
configured before you start.
Figure 35: Dive Plan Screen
Data Descriptions
1.
Dive Name (Optional)
– the name given to the dive
2.
Description (Optional)
– a description of the dive
3.
Location (Optional)
– the location of the dive
4.
Max Depth (Required)
– the maximum planned depth for this dive
5.
Water Type (Required)
– salt water or fresh water
6.
Available Divers
– the list of divers that can be used. Each time a diver is put in the water, the
Available Divers
list is filtered to remove any divers that would cause conflicts (e.g. divers with
the same Modem ID).
7.
Active Divers
– divers currently in the water
8.
Monitor Dive
– displays monitoring screens to track and control all diving operations. See the
Dive Monitoring section.
9.
Complete Dive
– completes the dive and generates the reports
