Diver6 Diver6 System Скачать руководство пользователя страница 35

Страница: 35 / 88

Diver6 User Manual

Section 4: Page 34 of 87

Topside Equipment Deployment Actions

Equipment

Action Summary

Battery Unit/Cable

•

Make sure the battery and cable are placed out of the way of Dive
Operations and in an area that is as dry as possible.

Topside Modem

Deployment

•

Attach the cable to the Topside Modem. NOTE: The shoulders of the male

pins on the cable plug should appear greasy. Please lightly grease the rubber

shoulders of the pins with silicone grease. A tube of Dow Corning #4 is

provided in the Tools & Spares Kit for this purpose. Please lube the

shoulders with the cable detached from the Topside Battery Unit.

•

Based upon the Dive Operations area select a location to deploy the Topside

Modem (see notes above for guidance on placement).

•

With the cable and mount secure, deploy the Topside Modem in the water
in such a way as the Topside Modem has a clear line of sight with the diver’s

operation area. It is recommended that a safety line (rope, stainless steel

cable) be connected to the Topside Modem in the event the modem would

get disconnected from its fixed mount.

Topside Equipment Post Deployment Actions

Equipment

Action Summary

Battery Unit/Cable

•

After use wash

THE CABLE ONLY (NOT THE BATTERY/BATTERY UNIT)

with

fresh water only and remove all traces of salt water and debris (do not use

abrasives and/or detergent) and allow to dry.

•

Visually check the battery unit/cable for damage.

•

Charge the Topside Battery and once charged place into the carry case for
storage.

Monitoring

Computer

•

Charge the monitoring computer battery.

•

Check computer operation by turning it on and running the Diver6 System
Software.

•

Optionally, copy the Dive Record Sheets onto an external storage device.

Topside Modem

•

Visually check the Topside Modem for damage.

•

After use wash with fresh water only and remove all traces of salt water
and debris (do not use abrasives and/or detergent) and allow to dry.

•

Once dry place the Topside Modem into the carry case for transit.

Содержание Diver6 System

























































































Результаты поиска

Содержание Diver6 System

Отзывы:

Бренды по названию

Популярные бренды

Diver6 Diver6 System, Руководство пользователя

Результаты поиска

Содержание Diver6 System

Отзывы:

Бренды по названию

Популярные бренды