DITECH DT5657, Инструкция по эксплуатации

Страница: 36 / 60

Safety
ENG
DEU
ENG
36
• for the registration of the actual temperature (room temperature) and the hu-
midity,
• for the setting of the target temperature (comfort temperature),
• for the control of the actual temperature by controlling thermal actuators, con-
nected Radiator Thermostats or electric heaters with pluggable switch,
• for the wireless communication in the DITECH Smart Home iL network.
• for the commissioning and configuration of the floor heating directly on the
room control unit (also without DITECH Smart Home iL network).
Any other usage, change, and modifications are strictly prohibited. Usage other
than the intended use leads to dangers for which the manufacturer is not liable,
and to an exclusion of warranty and liability.
2.3 Safety notes
All safety notes in these instructions must be observed in order to avoid accidents
with personal damage or property damage. No liability is assumed for personal
damage and property damage caused by improper use or non-observance of the
danger notes. In such cases any warranty claim is invalid. There is no liability for
consequential damages.
• Only an authorised electrician may install and connect the device.
• Only use the device if it is in flawless state.
• Observe the performance limits of the device and its environmental conditions.
• The device must not be used for disconnection.