DITECH DT5657, Инструкция по эксплуатации

Страница: 43 / 60

Commissioning
DEU
ENG ENG
43
in to the Access Point, configuration is done via the DITECH Smart Home iL app.
5.2.1 Teach-in without DITECH Smart Home iL central unit (stand-
alone operation)
Keep a minimum distance of 50 cm between the devices for teaching-in.
The teach-in process can be interrupted shortly pressing the teach-in key
again. This will be confirmed by a red illumination of the device LED.
If no teach-in process takes place, the teach-in mode is automatically
finished after 30 seconds.
If the DITECH Smart Home iL UP-Room Control Unit Display (DT5639) is to be
taught-in to the DITECH Smart Home iL Base Station, the two devices to be linked
must be brought into the teach-in mode.
1. Select the desired channel at the DITECH Smart Home iL Base Station (see instruc-
tions DITECH Smart Home iL Base Station).
2. Press the System key (A) of the Base Station for 4 seconds, until the LED of the
System key flashes rapidly in orange.
9 The device LED starts flashing orange.
3. Press the system key (D) of the DITECH Smart Home iL UP-Room Control Unit