DITECH DT5657, Инструкция по эксплуатации

Страница: 52 / 60

Operating modes and configuration
ENG
DEU
ENG
52
6.10 Configuration of the DITECH Smart Home iL Base Station
This menu is used to configure the DITECH Smart Home iL Base Station in stand-
alone operation.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol ”
“ and confirm the selection by shortly pressing the wheel.
If the room control unit is taught-in to more than one base station, select
the desired base station with the setting wheel.
The configuration menu for the DITECH Smart Home iL Base Station includes de-
vice parameters “UnP1/UnP2” and channel parameters “ChAn”, allowing to change
lead and follow-up times for the pump, setback temperatures, time intervals and
many other parameters.
Information about the configuration options can be found in the manual
of the DITECH Smart Home iL Base Station.
6.11 Connection Test
For this test, the device sends a switching command to the base station. Depend-
ing on the switching state of the assigned heating zone, it is switched on or off
after receiving the command for confirmation.
1. Press and hold the setting wheel (E) in order to open the configuration menu.