DITECH DT5657, Инструкция по эксплуатации

Страница: 56 / 60

Establishing factory settings
ENG
DEU
ENG
56
9 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. The cloth may be moist-
ened with lukewarm water for the removal of heavier contamination. Use a sol-
vent-free cleaning agent for cleaning.
10 Establishing factory settings
All settings will be lost when the factory settings are restored.
DITECH Smart Home iL central unit (app)
Ö The device is within the radio range of the DITECH Smart Home iL central unit.
1. Ensure that the device is active.
2. Delete the device from the app.
9 The factory settings are reset.
Stand-alone operation
1. Disconnect the electronic unit of the DITECH Smart Home iL UP-Room Control
Unit Display (DT5639) from the power supply unit (F) (see fig. 5 page 4).
2. Insert the electronic unit (B) into the frame. At the same time, press and hold
the system key for 4 seconds until the LED flashes orange quickly.
3. Release the system key.
4. Press the system key again for 4 seconds until the LED lights up in green.
5. Release the system key again.
9 The device restarts.
9 The factory settings are reset.