DITECH DT5657, Инструкция по эксплуатации

Страница: 44 / 60

Commissioning
ENG
DEU
ENG
44
Display for at least 4 seconds to activate the teach-in mode.
9 The teach-in mode is automatically activated for three minutes.
9 The device LED flashes orange.
The LED will light up in green after a successful teach-in process. The pro-
cess must be repeated if the LED lights up in red.
5.2.2 Teach-in to DITECH Smart Home iL central unit
For a control via the DITECH Smart Home iL app, the teach-in of the DITECH Smart
Home iL UP-Room Control Unit Display (DT5639) must be performed via the DITECH
Smart Home iL central unit (DT5637). Teach-in the device as follows:
Ö The DITECH Smart Home iL central unit (DT5637) has been set-up via the DITECH
Smart Home iL app (see manual DITECH Smart Home iL central unit).
1. Open the app on your smart phone.
2. Select the menu item
Teach-in device.
The teach-in mode is active for three minutes after installation.
The teach-in mode can be activated manually by briefly pressing the system key.
3. The device will be displayed automatically in the app.
4. For confirmation, enter the last four digits of the device number (SGTIN) or scan
the supplied QR code. The device number can be found below the QR code or
in the battery compartment.