DITECH DT5638, Инструкция по эксплуатации

Страница: 38 / 52

ENG
DEU
38
ENG
Commissioning
6. Enter the last four ciphers of the device number (SGTIN) or scan the supplied QR
code for confirmation. The device number can be found below the QR code or
in the battery compartment.
The LED will light up in green after a successful teach-in process. If the LED
lights up red, repeat the process.
7. Follow the instructions in the app.
5.2 Installation
The place of installation can be selected flexibly due to the battery operation. In-
stallation can be performed with screws, with the supplied adhesive strips, or in a
flush-type box.
5.2.1 On-surface installation
Ö Select an appropriate installation position.
1. Ensure that the installation position is free from hidden lines.
2. If necessary, release the device from the installation bottom with a suitable
screwdriver (see fig 3 page 5).
3. Hold the installation bottom to the installation position. Take care to align the
installation bottom correctly (see fig 2a page 4).
4. Mark two diagonally opposite bore holes using the installation bottom (see fig
2a page 4).
If wood walls are present, the screws can be screwed directly into the wood.
Pre-drilling with a 1.5 mm wood drill can facilitate the installation of the
screws.