DITECH DT5638, Инструкция по эксплуатации

Страница: 50 / 52

ENG
DEU
50
ENG
Decommissioning
1. Take off the DITECH Smart Home iL room control unit Display from the installa-
tion bottom (see fig 3 page 5).
2. Remove the batteries from the back side.
3. Uninstall the device and dispose of properly.
12 Decommissioning
11 Restoring the factory settings
The reset to factory setting will delete all settings made by the user.
DITECH Smart Home iL central unit (app)
1. Ensure that the device is active.
2. Delete the device from the app.
Stand-alone operation
1. Take off the device from the installation bottom (see fig 3 page 5).
2. Remove the batteries.
3. Re-insert the batteries according to the marking in the battery compartments.
At the same time press the system key (C) for 4 seconds until the LED flashes
rapidly in orange.
4. Release the system key (C).
5. Press the system key (C) again for 4 seconds until the LED lights up in green.
6. Release the system key (C) again.
9 The device restarts.
9 The factory settings are restored.