DITECH DT5638, Инструкция по эксплуатации

Страница: 40 / 52

ENG
DEU
40
ENG
Operating modes and configuration
4. Remove the protective foil from the other side of the adhesive strip.
5. Align the device horizontally to the desired position and press it on.
6 Operating modes and configuration
The setting wheel E (see fig 1 page 4) provides the operating functions of the
device. Depending on the configuration, the settings are transmitted to the Base
station or to the DITECH Smart Home iL app.
6.1 Configuration menu
The configuration menu is opened by pressing and holding the setting wheel (E).
The following symbols/menus are available by rotating the setting wheel; shortly
pressing the wheel will select them.
Section Display Meaning
6.1.1 Automatic operation
6.1.2 Manual operation
6.1.3 Holiday mode*
6.1.4 Operating lock*
6.1.5 Programming of heating profiles*
6.1.6 Date and time*
6.1.7 Offset temperature*
6.1.8 Selection of temperature display/humidity*
6.1.9 Configuration of the base station*
6.1.10 Connection test
*only selectable in stand-alone operation