DITECH DT5638, Инструкция по эксплуатации

Страница: 45 / 52

DEU
ENG
45
ENG
Operating modes and configuration
6.1.9 Configuration of DITECH Smart Home iL Base station
This menu allows to configure the DITECH Smart Home iL Base station in standalone
operation.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “ “ and confirm the selection by shortly pressing the setting
wheel.
If the room control unit is taught-in to more than one base stations, select
the desired base station with the setting wheel.
The device parameters “UnP1/UnP2” and the channel parameters “ChAn” are avail-
able in the configuration menu for the Base station; these parameters allow the
modification of the pump lead and follow-up times, setback temperatures, time
intervals and many other parameters.
Information on the configuration possibilities can be found in the Base sta-
tion instructions.
6.1.10 Connection test
During this verification the DITECH Smart Home iL room control unit Display sends a
switching command to the base station. Depending on the switching status the as-
signed heating zone has, it will be switched on or off after receiving the command.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “ “ and confirm the selection by shortly pressing the setting
wheel.