DITEC 0DT869, Инструкция по установке, обслуживанию и эксплуатации

Страница: 29 / 48

- 29 -
0DT869 2019-01-30
2. TECHNICAL CHARACTERISTICS
Ref. Description
1 Lateral plate of the transom
2 Transom
3
Rolling shaft
4 Linear Encoder (SLE)
5 Polyzene guide upper section
6 Polyzene guide lower section
7 Fixing plate of the guide
8 Angular vertical post
9 Supporting spring
10
Fixing screw
11 Column cover
Ref. Description
12 Geared motor K22
13 Manual driving device
14
Manual driving rod
15 Electronic board
16 Photocell 5FB
17 Polyester curtain
18 PVC transparent window
19 Vertical re reinforcing strips
20 Bottom edge with sand ballast
21
Motor carter and opposite side plate cover
Correctly size the line conductor cross-section by referring to the indicated absorption and taking the length and
installation of the cables into account.
7
5
4
6
8
10
9
16
1
21
5
6
8
3
18
17
20
19
11
2
1
12
13
21
14
15
CONTROL PANEL INVERTER (52E)
Power supply voltage ................................................................................................................... 230 V monofase 50/60 Hz
Line sizing ...................................................................................................................................................................16 A
Auxiliary control power voltage ...................................................................................................................................24V
Motor rating .................................................................................................................................................................. 0,6 KW
Control board protection class .........................................................................................................................................IP 55
Operating temperature ...........................................................................................................................................- 5 + 50 °C
EN