Operating Instructions
DISAG RM IV
Operating Instructions DISAG RM IV Seite 24
The respective target data can be measured with a millimetre gauge but this data can also
to be found in the "Sport Ordinance" of the German Shooters Association (see target
data).
Continue scrolling with the ARROW TO THE RIGHT KEY. The diameter of bull's-eye is
called for:
Bulls eye diam.
20000 ?
The 200.00 mm is to be confirmed, if this is the diameter of the bull's-eye. Another entry
can be made as indicated in the previous menu point by means of the CLEAR key,
NUMERICAL KEYS and ENTER key. Since no decimal point can be entered just the
figures are to be entered in their given sequence.
Continue scrolling with the ARROW TO THE RIGHT KEY. The following appears in the
display:
Ring 10 diam.
5000 ?
This can be also confirmed if the ten ring is 50.00 mm in diameter. As you are well aware
another entry can be made by means of the CLEAR key, NUMERICAL KEYS and ENTER
key.
Continue scrolling with the ARROW TO THE RIGHT KEY. The following appears in the
display:
Ring width 9
2500 ?
and
Ring width 1-8
2500 ?
The width of the ring is the distance between the two rings (only 1 to 9). This entry is also
to be confirmed with the ENTER key. Another entry can be made as indicated in the
previous menu point by means of the CLEAR key, NUMERICAL KEYS and ENTER key.
Since no decimal point can be entered just the figures are to be entered in their given
sequence.
Continue scrolling with the ARROW TO THE RIGHT KEY. The following appears in the
display:
