Operating Instructions
DISAG RM IV
Operating Instructions DISAG RM IV Seite 18
5.3 DFC key ( Distance From Center )
The DFC menu is accessed with the DFC key. By pressing the ENTER key the DFC
display is switched on and off by means of the CLEAR key. Afterwards the actual
maximum DFC for the active type of target will be displayed. The actual setting can be
taken over with the ENTER key. Should another setting be required the new maximum
DFC must now be entered and confirmed with the ENTER key. The maximum DC is the
limit value for the display (printout) of the DFC values. Only DFCs up to this maximum
DFC are displayed (printed). DFCs that are larger are not evaluated.
This setting can be left by means of the ESC key. The entered settings will then be deleted
when the machine is switched off. Please read the instructions under "machine
configuration" to file the settings permanently.
5.4
SHOT key
SCHUSS
The number of shots per target for the actual type of target can be altered by means of the
SHOT key. The next possible number of shots will be jumped to every time by repeatedly
pressing the SHOT key. The number of shots can also be altered through the ARROW
KEYS. The actual selected number of shots is to be confirmed and taken over with the
ENTER key.
The given setting can be left by means of the ESC key. The entered settings are deleted
after the machine has been switched off. Please read the instructions under "machine
configuration" to file these settings permanently.
5.5
1/10 key
Whether the ten rings are to be evaluated or not is set by means of the 1/10 key. The
ENTER key means YES, the CLEAR key means NO.
The cursor blinks on the active setting.
Subsequent setting of the ten rings for the ten DFC. Here again the ENTER key means
YES and the CLEAR key stands for NO.
The setting can be left by means of the ESC key. The entered settings will be deleted after
the machine is switched off. Please read the instructions under "machine configuration" to
file the settings permanently.
