Operating Instructions
DISAG RM IV
Operating Instructions DISAG RM IV Seite 19
5.6
ENTER key
The ENTER key serves to confirm an entry in all menus for possible selection. In the
display <
> corresponds with the ENTER key.
5.7
CLEAR key
The CLEAR key serves to delete an entry or display in all menus or reject a possible
selection. In the display <#> corresponds with the CLEAR key.
Once a target has been evaluated another ring value can be entered by hand by means of
the CLEAR key after pressing an ARROW KEY. Ring values entered by hand are marked
with "#" as symbol.
Moreover, an incomplete series can be deleted by means of the CLEAR key when the
series is shown in the display.
5.8
NEW START key
Neu-
start
Evaluation can be started again with the NEW START key or a new type of target can be
entered by means of the learn-in procedure. Should the NEW START key be pressed
during a running series then a fault message will be displayed (see SERIES key).
The function of the NEW START key has already been explained in the chapter on
"commissioning".
