DirecTV L12, Руководство пользователя

Страница: 31 / 84

19
19
Chapter 1
Guided Setup & Activation
Guided Setup & Activation
Now that your receiver and equipment are all hooked up and plugged in, you’re ready to
finish all the details to begin receiving your DIRECTV service.
1) Make sure the MODE SWITCH on the remote control is set to DIRECTV.
2) Press TV POWER ON. The DIRECTV Receiver will turn on.
3) The first screen will allow you to select a language. Using the arrow keys on the remote control,
move to the language you prefer and press SELECT.
4) You will see a Welcome screen.
Now, let us lead the way…
Simply follow the onscreen directions to complete your setup functions. If you’ve installed your
satellite dish and system yourself, you’ll be guided though various functions for optimizing your
signal and setup — including positioning your dish and a system test. If, like most people, you had
your system professionally installed, these functions already have been completed.
Guided Setup & Activation
Important
In order to protect your TV screen from burn-in (a side-effect caused when a stationary image is displayed for too long),
the DIRECTV Receiver interface automatically goes into screen saver mode, and displays a black screen with a moving
logo when no key is pressed for 5 minutes or more while a stationary image is displayed on the TV. To dismiss the
screen saver and return to what you were doing, press any key on the remote. Burn-in may cause permanent damage to
your TV and DIRECTV is not liable for any damages that may be caused to your TV.
After these setup procedures are complete, you’ll see the Satellite Data Acquisition screen, as the
receiver gathers information from the satellite for the onscreen program guide.
Next, you’ll be given the opportunity to set up your phone connection, as well as program your
remote to control other equipment such as your TV and/or DVD player. Just follow the screen
instructions and you’ll be ready to watch in no time!
Activate Your DIRECTV Service
Once all the setup processes are complete, all that’s left to do is activate your DIRECTV service.
Before you make the call, be sure to:
4
Tune to Channel 600 and be sure you’re picking up a satellite signal (DIRECTV channel).
4
Have on hand your service address, identification card and a valid major credit card.
4
Note your access card and receiver ID numbers (find these by pressing MENU, then go to
Settings and press SELECT. Then go to Setup and press SELECT. Highlight Info & Test and press
SELECT.
When you’re ready, just call DIRECTV and pick the programming package that’s right for you.
16855980_L12_Jan27_2.indb 19 2/6/08 12:48:47 PM