DirecTV L12, Руководство пользователя

Страница: 27 / 84

15
Chapter 1
Choose Your Setup
15
A/V Connection (Better Quality)
Using the A/V cable, connect the white, red and yellow plugs from one end of the A/V cable to
the AUDIO L (white) and R (red) and VIDEO (yellow) output jacks on the back of the DIRECTV
Receiver. Connect the other end of the A/V cable to the corresponding A/V input jacks on your TV.
If hooking up a VCR, using another A/V cable, connect the white, red and yellow plugs from one end
of the A/V cable to the AUDIO L (white) and R (red) and VIDEO (yellow) output jacks on the back
of the DIRECTV Receiver. Connect the other end of the A/V cable to the corresponding input jacks
on your VCR.
Then, run an A/V cable from the VCR’s A/V output to the TV’s A/V inputs. This will allow you to
watch videotapes. NOTE: If your TV only has one set of A/V input jacks, this connection can also be
made by running a RF cable (not included) from the VCR’s out to TV jack, to the TV’s antenna in
jack.
Now, continue on page 16, “Connecting Your DIRECTV Receiver to Your Telephone Line.”
If your TV only has one audio input jack use AUDIO L (white) jack on the back of the DIRECTV Receiver to make
the connection.
VERY GOOD QuALITY
CONNECTION – A/V
The back panels of your
equipment may not look
exactly like those illustrated.
(SWM-1)
SATELLITE IN
S-VIDEO OUT
VIDEO OUT AUDIO OUT
VIDEO OUT
CH
3 4
OUT TO
TV
OFF-AIR
IN
PHONE JACK
USB
GROUND
LEFT RIGHT
AUDIO OUT
2
1
2
Television
DIRECTV
®
Receiver
1
4
3
AC IN
16855980_L12_Jan27_2.indb 15 2/6/08 12:48:38 PM