DirecTV L12, Руководство пользователя

Страница: 29 / 84

17 17
Choose Your Setup
Chapter 1
RF Coaxial Connection (Good Quality)
Using an RF coaxial cable (not included), connect one end to the OUT TO TV jack on the
DIRECTV Receiver and the other end to the antenna in jack on the TV or VCR. If hooking up a
VCR, use another RF coaxial cable to connect one end to the out to TV jack on the VCR and the
other end to the antenna in jack on the TV.
Set the 3/4 switch on the back of the DIRECTV Receiver to the “blank” local channel for in your
area. For example, if you have a local Channel 3 in your area, then move the 3/4 switch to Channel 4.
If you have a local Channel 4, then set the switch to Channel 3. To watch DIRECTV programming,
tune your TV to Channel 3 or 4 (depending on the position of the 3/4 switch in step 3 above).
Connecting Your DIRECTV Receiver to Your Telephone Line
Plug one end of the telephone cord into a phone jack on your wall (or into a phone splitter that
is plugged into a phone jack) and the other end into the PHONE JACK on the back of the
DIRECTV Receiver.
Completing the Connections
Plug all power cords into electrical sockets.
NOTE: The Good Quality connection can also be made using A/V cables if your VCR has A/V inputs. To connect using
the A/V cables, connect the audio L (white), R (red) and video (yellow) plugs from one end of the A/V cable to the
AUDIO 1 L and R and VIDEO 1 jacks on the back of the DIRECTV Receiver. Connect the other end of the A/V cable to
the corresponding jacks on your VCR.
GOOD QuALITY
CONNECTION – RF Coaxial
The back panels of your
equipment may not look exactly
like those illustrated.
(SWM-1)
SATELLITE IN
S-VIDEO OUT
VIDEO OUT AUDIO OUT
VIDEO OUT
CH
3 4
OUT TO
TV
OFF-AIR
IN
PHONE JACK
USB
GROUND
LEFT RIGHT
AUDIO OUT
2
1
T elevisio n T elevision
DIRECTV
®
Receiver DIRECTV
®
Receiver
AC IN
RF cable not included
16855980_L12_Jan27_2.indb 17 2/6/08 12:48:44 PM