5 Configurations on Web Interface
UC100-1
V
1S1O User Manual
Copyright©2011-2016 Dinstar
52
Ring Timeout (s)
The timeout value for the ringing of the analog phones of the FXS
port when there are incoming calls
No Answer Timeout
(s)
The timeout value for ending a call which goes out through the FXS
port, when nobody answers the call.
Flash Detection
Whether to enable flash-hook detection; If flash detection is not
enabled, the press on flash-hook will be ignored and won’t be
processed.
Min Time(ms)/
Max Time(ms)
Min Time: when flash-hook detection is enabled, if the time of the
press on the flash-hook is less than this minimum time, the press
will be ignored and won’t be processed.
Max Time: when flash-hook detection is enabled, if the time of the
press on the flash-hook is longer than this maximum time, the
phone will be hanged up.
DTMF Send
Interval(ms)
The minimum interval between the sending of two DTMF tone
DTMF: Dual Tone Multi Frequency
DTMF Gain
Signal gain of DTMF
DTMF Duration
(ms)
The minimum duration of a DTMF tone
DTMF Detect
Threshold
The threshold for the device to detect DTMF
DTMF Teminator
The terminator for ending DTMF detection. It means when the
terminator is detected, the system will think the dialing is
completed and begin to process call.
Send DTMF
Terminator
Whether to send DTMF terminator
CID Send Mode
The modes of sending CID to the called phone when there are
incoming calls, including FSK and DTMF;
FSK: Frequency-shift keying; CID: Caller ID
Message Mode
The message modes to display caller information, including SDMF
and MDMF
Message Format
The
message formats to display caller information, including
Display Name and CID, Only display Name, Only display CID
Send CID Before
Ring
If it is enabled, the CID will be shown before ringing; otherwise,
CID will be displayed after ringing
Send CID After
Ring(ms)
If it is enabled, the CID will be shown after ringing; otherwise, CID
will be displayed before ringing
Delay Timeout After
Ring (ms)
The maximum interval between ringing and displaying of CID
Impedance
The impedance
（
SLIC
）
matched with analog phones