5 Configurations on Web Interface
UC100-1
V
1S1O User Manual
Copyright©2011-2016 Dinstar
39
Figure 5-32 Port Mapping
2. Click the
New
button.
3. Fill in information on the following interface.
Figure 5-33 Create New Port Mapping
Table 5-8 Explanation of Parameters for Port Mapping
Name
The name of this port mapping
WAN Port
The port of the client in the wide-area network, which is to visit
local-area network
Protocol
Choose TCP, UDP or TCP/UDP
LAN IP
The IP address of the to-be-visited client in local-area network
LAN Port
The port of the to-be-visited client in local-area network (this port
cannot conflict with the port of UC100-1G1S1O)
4. Click the
Save
button to save the above configurations.
5.4.6
DMZ Setting
When the UC100-1G1S1O gateway works under the route mode and the DMZ service is
enabled, the clients in the wide-area network are allowed to have direct access to the clients in
the DMZ (
demilitarized zone
).