5 Configurations on Web Interface
UC100-1
V
1S1O User Manual
Copyright©2011-2016 Dinstar
40
Figure 5-34 Enable DMZ Service
5.4.7
Diagnostics
On the
Network
Diagnostics
interface, you can use three network utilities including Ping,
Traceroute and Nslookup to diagnose the network, and can capture data packages of the
available network ports.
Figure 5-35 Network Diagnostics
Ping
is used to examine whether a network works normally through sending test packets and
calculating response time.
Instructions for using Ping:
1. Enter the IP address or domain name of a network, a website or a device in the input box
of Ping, and then click
Ping
.
2. If related messages are received, it means the network works normally; otherwise, the
network is not connected or is connected faultily.