5 Configurations on Web Interface
UC100-1
V
1S1O User Manual
Copyright©2011-2016 Dinstar
41
Traceroute
is used to determine a route from one IP address to another.
Instruction for using Traceroute:
1. Enter the IP address or domain name of a destination device in the input box of Traceroute,
and then click
Traceroute
.
2. View the route information from the returned message.
Nslookup
(Name Server Lookup)
is a
network command-line
tool to obtain
domain name
of
internet or to diagnose the problems of DNS.
Instruction for using Nslookup:
1. Enter a domain name and then click
Nslookup
.
2. View the DNS information from the returned message.
Network Capture
On the following
interface, you can capture data packages of the available network ports. You
can also set source IP, source port, destination IP or destination port to capture the packages
that you want.
Figure 5-36 Network Capture
Note: If there are multiple source or destination IP addresses, please use ‘|’ to separate them,
for example, 172.16.115.12|172.16.115.15.
After package capturing is completed, save the captured packages on a computer and then use
a tool to analyze them.
5.4.8
DDNS
If DDNS
（
Dynamic Domain Name Server
）
service is enabled , when the IP address bound to
a domain name changes, the new IP address will be sent to the DDNS, and thus user can visit