Dinolift DINO 210XTB II, Руководство по эксплуатации

Страница: 41 / 67

41
The platform movements can be operated with continually adjustable speed from the
platform control centre (not from the chassis control centre). Only one movement can be
operated at a time. If several control levers are operated simultaneously, only the movement
with the least resistance will operate.
Observe when lifting the platform
• the operating range of the platform depends on the load (see “Technical Data”) and
is monitored by the safety limit switches RK4 and RK5, which are located under the
protecting cover
• The limit switches must not be adjusted or modified. The inspection and adjustment may
only be carried out by an authorized serviceman.
Working in the same position for a long time
• there are pushbuttons for both stopping and starting in both the platform and the chassis
control centres
• When the weather is warm, and the platform is kept for a longer period in the same
position, it is not necessary to let the engine run continuously.
• when the weather is cold, it is, however, recommended to let the engine run to keep the
hydraulic oil warm
• It is recommended to also leave the combustion engine running between the operations,
to ensure the battery remains well charged
• check the stability and condition of the base regularly during the operation, taking into
account the weather and ground conditions
• the electric timer of the lift automatically disconnects the supply voltage (12 VDC) in
about 1 hour after the electric motor or the combustion engine has been turned off.
• Re-activate the power supply by pressing the start button either in the chassis control
centre or in the platform control centre.
When moving the platform, remember the following
• beware of high voltage power lines
• do not touch open electric wires
• do not throw objects from the platform
• do not damage the lift
• do not damage other devices
DANGER
WARNING
CAUTION
NOTICE
Do not take additional load in the upper position.
Do not exceed the max. allowed lateral force (400N) or load the platform vertically more
than what is allowed
Lowering the platform to transport position:
Before lowering the boom onto the transport support, retract the telescope completely and
turn the platform perpendicular to the boom.
DANGER
WARNING
CAUTION
NOTICE
Do not damage the tow-bar jockey wheel while lowering the platform to transport position