Dinolift DINO 210XTB II, Руководство по эксплуатации, Страница: 39 / 67

39
5.2. INSTRUCTIONS FOR WORKING
Do all daily maintenance tasks and operational inspections stated in the maintenance
manual before operating the lift.
Failure to check the correct functioning of safety
devices may cause serious injury or make the consequences of an accident worse.
All malfunctions in safety devices must be repaired before operating the lift
DANGER
WARNING
CAUTION
NOTICE
5.2.1. Operating the lift from the chassis control centre LCB
1. Turn the selector switch (1) to position ”chassis control centre LCB”.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
2. Lift the platform from the tow-bar and turn it to the side so that you can lower the boom.
3. Extend the telescope if necessary to ensure that stepping onto the platform is safe.
4. Drive the boom functions from control levers 7, 8, 9, 33 and the platform from lever 32
Do not damage the tow-bar jockey wheel!
DANGER
WARNING
CAUTION
NOTICE
The boom movements are noticeably slower when the emergency descent system is used.
The speed of the boom movements cannot be adjusted continually with the control levers
when the lift is operated from the chassis control centre.
5.2.2. Operating the lift from the platform control centre UCB
Lift the platform from the tow-bar and turn it to the side so that you can lower the boom.
Extend the telescope as much as is necessary to ensure that stepping onto the platform is
safe.
5. Turn the selector switch (1) to position ”Platform control centre UCB”,
and take away the key. Do not lock the protective cover of the chassis
control centre.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
6. Start the normal operation of the lift
Step on the platform and drive the boom and platform movements as follows
• Start the engine with start-button
1 2
3 4
• Operate the boom system with control levers in the UCB control
centre.
• If possible, keep the telescope short while lifting and lowering
movements