Dinolift DINO 105T, Руководство по эксплуатации, Страница: 49 / 78

DINO 105T
49
DAILY INSPECTION (START-UP INSPECTION)
To be always performed at a new work site and in the beginning of every working day.
The inspection is performed by the user. In the inspection attention shall be paid to the following
issues:
- establish the load-bearing capacity of the ground at the lifting site (see the guidelines in the
table "maximum permissible ground pressure for different soil materials" on page 17)
- verify the standing stability of the lift.
- control the due operation of the level display.
- test the operation of the emergency stop system both from the platform and the chassis control
panels.
- test the operation of the emergency descent system
- test the alarm signal.
- check the warning and signal lights.
- check the operation and cleanliness of the lights and reflectors.
- check the condition of the operating controls and test the working movements.
- check the condition of the access routes, the platform gate and the handrails.
- check the operation of the limit switches, which block the boom movements (refer to the service
instructions).
- check the operation of the limit switches, which block the outrigger movements (refer to the service
instructions).
- check the hydraulic connections for leaks.
-
test the brakes.
- check the structure visually.
- observe the location of nearby power lines (refer to the safety distances on page 9)