Dinolift DINO 105T, Руководство по эксплуатации, Страница: 44 / 78

DINO 105T
44
6. Inspection of the boom and the chassis
-
extend the telescope and check the platform, its attachment and the boom
-
check the boom joints and slide pads /play and readjust if necessary, lubricate the sliding
surfaces
- check the turning device and
its attachment, lubricate the
turning bearing and the gear
ring.
- check the turning bearing play
by turning: Max. permissible
play is about 1 mm.
- check the tightening torque of
the attachment bolts, 150 Nm
(M12)
If you have to unscrew or tighten the
attachment bolts, do not forget to use
bonding adhesive
NOTE! Excess grease pressure may
press out the turning bearing seal.
- check the chassis with its
weld seams, especially around
the turning device and
attachment points of the
outriggers.
- check the outriggers
-
check the towbar, in particular
its attachment to the chassis.
- lubricate the boom and the outrigger joint bearings.