Dinolift DINO 105T, Руководство по эксплуатации, Страница: 29 / 78

DINO 105T
29
CONNECTION TO THE TOWING VEHICLE
1. Lift up and push forward the ball coupling handle (in the driving direction). Now the ball
coupling is released.
2. Press the ball coupling onto the towball using only a little force. The connection and locking
take place automatically.
NOTE! ALWAYS MAKE SURE AFTER THE CONNECTION THAT THE BALL COUPLING
IS PROPERLY LOCKED!
Clean and lubricate the ball coupling regularly.
3. Connect the emergency stop wires and light plug to the vehicle. Check the cable for chafing
and proper operation of the wires.
4. Check the operation of the lights
5. Carefully release the parking brake and make sure that its locking is in order and that its handle
stays in the lower position.
6. Lift up the jockey wheel to transport position.
No load allowed on the platform during towing of the lift.
In particular, if you are parking or disconnecting the lift from the towing vehicle on a slope, apply the
parking brake as firmly as possible. After having applied the parking brake, push the lift backwards to
make the reverse automatics release the brake-shoes. The spring cylinder pulls the parking brake
tighter. Thus the brakes of the vehicle are again properly on.
Adjust the brakes according to the service instructions.
Place chocks under the wheels as an additional precaution.
If you leave the lift standing for a longer period of time, for example over the winter, we recommend
to prop it up to relieve any load from the wheels.
NOTE!
-
Check:
- transport position of the outriggers
- locking of the ball coupling
- operation of the lights
-
locking of the axle unit
- parking brake
- condition and pressure of the tyres (230 kPa)
- safety wires
-
locking of the brakes after transportation
- attachment of the jockey wheel