Dinolift DINO 105T, Руководство по эксплуатации, Страница: 28 / 78

DINO 105T
28
PREPARING THE LIFT FOR TRANSPORT
1.
Retract the telescopic boom completely.
2.
Check that the boom is parallel to the towbar.
3.
Lower the boom/platform onto the transport support on the towbar, extend the telescope until the
boom gets locked in its catch.
-
The limit switch on the transport support prevents the operation of the support outriggers if the
platform does not lie steady on the support.
4.
Close the cover of the platform control panel.
5.
Turn the selector switch 1
outriggers to position (1)
6.
Lift the support outriggers
-
at first the rear support
outriggers (do not damage the
rear lights)
-
then the front support
outriggers (do not damage the
jockey wheel)
7.
Apply the parking brake.
8.
Turn the selector switch to position 0 and disconnect the lift from the power supply.
9.
Make sure that the covers are locked
5 6 7
1
11