Dinolift DINO 105T, Руководство по эксплуатации, Страница: 47 / 78

DINO 105T
47
14. Check the wheel bearings and the brakes
-
remove the wheels and the brake drums
- clean the brake system, check its adjustment and make sure the brakeshoes move and the return
springs operate properly
- replace worn out linings, if necessary,
-
the wheel bearings are lubricated for life (no need for subsequent lubrication)
- adjust the brakes
-
put the wheels in place and tighten the wheel bolts (90 Nm)
- check the tyre pressures (2.3 bar)
-
check the free movement of the overrun brake and the parking brake
- check the safety wires.
15. Check the condition of the lights and reflectors.
16.
Repeat the anti-corrosion treatment using e.g. Tectyl 210R anti-corrosion agent.
17.
Test-run with a load of 120 kg following the loading instructions.
Check the structures after the test-run.
18.
Draw up a test protocol, save your own copy and give the other copy to the customer.