Dinolift 240RXT, Руководство по эксплуатации

Страница: 13 / 113

DINO 240RXT
13
5.1 !! Instructions for safe operation!
-
Use a safety harness while on the platform.
-
Use hearing protectors when operating the power unit from the chassis panel. Sound pressure
level 91 dB.
-
Never load the platform while in the upper position.
-
The lift must not be used when the temperature is below -20°C and the wind speed exceeds
12.5 m/s.
-
Beware of live power lines within the work area.
-
The lift MUST NOT be used as a crane.
-
Always ensure the load-bearing capacity of the standing surface.
-
Ensure the unobstructed range of movement before operating the outriggers.
-
While in the support position, ensure that the wheels are off the ground.
-
Always verify the horizontal position of the machine.
-
Ensure that the outriggers cannot slide while on a gradient.
-
Always ensure that the work area is clear of outsiders. Danger of getting squeezed between
rotating and fixed structures.
-
Stepping on or off the platform in motion is prohibited.
-
The maximum-allowed gradient during transfers is 35%. During transfer in rough terrain, try
to stay above the machine.
-
While operating the boom from the control panel on the turning device, beware of getting
pressed against the outriggers or other structures that do not turn with the boom.
-
When the boom is in its lowest positions, make sure it cannot clash during rotation with
structures that do not turn with the boom.
-
Before operating, always ensure that the safety devices and the emergency descent system are
in working order.
-
Do not take tools/material of large surface area onto the platform. The increase in wind load
may jeopardize the stability of the device.
-
Always keep the lift free from dirt, snow and ice.
-
Ensure that the lift is inspected and serviced, before use.
-
Never use a defective lift.
-
Never use a lift alone. Make sure, there is always someone on the ground, who can call for help
in case of an emergency.