Dinamica Generale DG8000, Руководство оператора

Страница: 89 / 105

Use INDICATOR DG8000 RevB0
E
N
GL
IS
H
87
WiFi MANAGEMENT
WiFi syncronization is an easy and effective way to obtain execution data from DG8000
microcomputer and load it on new programs to be executed.
DG8000 can acquire and transfer data on executions by the means of WiFi directly to DTM
software installed on the PC. To have this option you need to have IPcom™ module
connected to DG8000.
TO START THE WiFi SYNCRONIZATION
1
Once the DG8000 is in Total Weight, press the key in order to start the WiFi
synchronization with DTM software.
2
You will see the message that the microcomputer is searching for WiFi connection.
3
Once the WiFi connection between DG8000 and DTM is established you will see on
the bottom part of the screen the operations currently executed.
4
After WiFi communication is over you will see the screen with the summary of data
transfer. You can see if the new progammation have been acquired by the
microcomputer and data on the executions transferred to DTM.
5
Press ENTER to return to the Total Weight mode.
If you have several DG8000 microcomputers working with the same DTM software DO
NOT execute the WiFi synchronization on them simultaneously. In this case the
microcomputer will show error message and synchronization won’t be executed. At any
moment of time DTM software can communicate via WiFi with only one DG8000
microcomputer.