Dinamica Generale DG8000, Руководство оператора

Страница: 50 / 105

Configuration INDICATOR DG8000 RevB0
48
USE OF THE DATA TRANSFER (MEMORY CARD)
Before to perform any operations of data transfer, it is necessary connect the memory card
to the indicator and format it.
DG8000 allows to program the Recipes or Unloading programs in the following ways:
a) MEMORY CARD CONNECTED (DG8000 shows the message “Data Transfer
INSERTED”)
b) MEMORY CARD NOT CONNECTED
Like shown in the CONNECTIONS SCHEME section, the universal box uses a data
transfer card, and the slim box uses a USB key. The two devices work exactly the same.
1
If the base parameter number 89 Data Transfer Enabled is set to YES the recipes will
be read directly by the memory card and subsequently the executions will be
memorized on the card.
If this parameter is set to YES when the indicator is turned on, without the memory card
connected the message “DT IGNORED” will appear; push the ENTER key to continue.
On the contrary if the indicator is turned on with the memory card connected the
message “DT INSERTED” will appear.
2
If the base parameter Data Transfer Enabled is set to NO the Indicator will work without
the card, so not one execution will be saved on the card.