Dinamica Generale DG8000, Руководство оператора

Страница: 79 / 105

Use INDICATOR DG8000 RevB0
E
N
GL
IS
H
77
Auto link between an Unloading Program and a Recipe
This functionality allows the user to have the recalculation of the loading if the linked
Unloading Program has been changed previously.
This functionality works if :
- The base parameter “ Load Update by Unload “ is set to “ YES “ ( see the
paragraph )
- The loading program and the Unloading Program has been linked together by the
DTM).
1
Go inside one of the unloading
program, pressing the button
, and make a modification
inside of it.
2
Pressing the button to save
the modification, the indicator will
show a warning message and it will
update the linked Recipe In terms of
number of cows, total quantity and
quantity for each ingredient.
3
Check the linked Recipe and verify
that the Recipe and the Unloading
Program have the same Total
quantity and the same number of
cows.
IMPORTANT NOTE: To use correctly this way of working, we suggest to have the base
parameter 167 “Save Total Unload “ to NO.