Dinamica Generale DG8000, Руководство оператора

Страница: 69 / 105

Use INDICATOR DG8000 RevB0
E
N
GL
IS
H
67
3
If you press the key you can
suspend the program during the
movements of the wagon so that the
soil conditions and mechanical
tensions do not alter the weight, on the
display you will see the “program
suspended” message.
Press the same key to re-start the
program and resume working, the
system will show the weight the was on
the display before suspension.
4
If you press the key you can recall the programmed value of a component.
This function is used in case of mistakes by the operator or in case the program is not
suspended during the movements and a variation in the weight of the component to be
loaded occurs. You must keep it pressed for 2 seconds (as indicated on screen).
End of the execution
When the execution is completed, the message “Execution saved” appears and then the
system shows the programmed total to be loaded, the total actually loaded, the error in Kg
and in percentage obtained and will start the mixing time if programmed.
It is possible stop the mixing time by pressing the RESET key.
At the end of the load the system will be positioned on the program for this group.