Dinamica Generale DG8000, Руководство оператора

Страница: 29 / 105

Configuration INDICATOR DG8000 RevB0
27
E
N
GL
IS
H
34
Unit of
Measure
Kg, Lb
(Kg)
Measuring unit for weight.
35
Customer ID 0..99
(0)
Customer code.
44
Manual
Alarm Value 0..65000
(0) Alarm threshold (weight) in “Partial” mode.
47
Mix
Transmissio
n Ratio
1,00..650,0
0 (1,00)
Transmission relationship between cardan joint
and auger.
78
Scheduling
Alarm Delay
3..60
(15)
Duration in seconds of the acoustic alarm in case
of automatic activation by means of the
scheduler of a program
81
Unload
Stabilization
Time 0..100
(0) Weight stabilization time (after each unloading).
The parameter “Stabilization Time” is only
referred to the load
82
Minimum
Temperature -20...-50°C
( -20) Temperature under which a relative event is
saved when it is exposed to low temperatures.
83
Maximum
Temperature 20..60°C
(50) Temperature over which a relative event is saved
when it is exposed to high temperatures.
88
% Start
Loading 0..100
(5) Percentage of weight loaded, in respect to the
total amount of the Component. When reached,
the beginning time of the loading of the
Component is saved.
89
Data
Transfer
Enabled YES/NO
(NO) Enable/disable of the DT card.
91
Remote
Display
Operation
Mode MENU/
TOTAL
(MENU) Function mode of the weight repeater.
MENU shows the weight visualized on the
display
TOTAL always shows the total amount loaded on
the mixer.
99
Suggested
weight to
unload Theoretic;
Tot
Loaded;
Tot Mixer;
(Theoretic.) At the end of a loading execution you
automatically pass to the unloading phase. The
quantity proposed to unload could be the same
as:
Tot loaded : total loaded during the execution
Tot mixer : total present in the mixer
Theoretic : total programmed on the scale head at
the beginning of the execution