Dinamica Generale DG8000, Руководство оператора

Страница: 38 / 105

Configuration INDICATOR DG8000 RevB0
36
Password 23 - Calibration procedure with fixed values
In this section, the calibration value of the local plant is set from a list of pre-defined values
for given loading cell types:
1
The system waits for the operator to confirm, by pressing ENTER, that he/she wants to
proceed with calibration (by pressing RESET, you can go back to the main
configuration menu).
2
Select the kind of loading cell
connected to the system with the
↑
or
↓
keys.
The available kinds are:
•
Cell BAA3-60
•
Cell 63-axle (diameter
63installed on the axle)
•
Cell 63 (diameter 63 standard)
•
Cell 54 (diameter 54 standard)
•
Cell 42 (diameter 42 standard)
•
Cell BAA3-80
3
Press ENTER to confirm the selected cell;
4
A waiting message will show. In the meantime the system will recall the calibration
value associated with the selected loading cell. After that, the microcomputer asks for
confirmation of the modification which has just occurred. If no errors are there, you can
confirm by pressing ENTER;
5
In case of errors, you need to press RESET and start the cycle afresh
In case of a configuration with 4 independent channels, this procedure needs to be
repeated for every single channel.