The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
26
Tariff Show
The procedure to use the Tariff Show is as follows:
1. Keep pressed
K2
for few seconds to enter
in the menu selection
2. Select
TAR-SH
by pressing
K2
3. Confirm by
K4
the Tariff Show viewer
4. To go to the next programmed
value press
K4
5. To go to the previous programmed
value press
K3
Every time
K4
is pressed you will go
to the next parameter index in the same
order as specified before for each programmed
block (up to 6).
by pressing
K4
again the Tariff Show viewer will display
the Four Extras programmed values
(from F1 to F4):
To exit from Tariff Show menu and go back
to For Hire position, press
OP
.
