The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third party
is strictly prohibited.
21
Statistical Memory
How to Print the Statistical Memory Content
The taximeter records and keeps data in 2 Memory Blocks, each one divided in 20 locations.
The content of both Block1 and Block2 can be printed out.
How to Print the Statistical Memory Information
Print Statistics / Reset Memories
Loc.
Block
Action
8
1,2
Print Statistical Memories - Blocks 1 & 2
18
1,2
Reset Block 2 (if allowed)
19
1
Reset Block 1 (if allowed)
20
1
Reset Blocks 1&2 (if allowed)
Advanced Functions enabled by the Black Programming Key
Some specific actions are allowed only when the taximeter is un-sealed and the Black Programming key is inserted:
Loc.
Block
Action w/key inserted
6
2
Reset receipt number
9
2
Print Free Run Block
17
2
Taximeter General Default
18
1,2
Reset Blocks 2 (forced)
19
1,2
Reset Blocks 1 (forced)
20
1
Reset Blocks 1&2 (forced)
Select For Hire position.
Press K1 and K2 at the same time to enter in the “Statistical
Reading “ mode.
The big display will show “Statis” for a few seconds.
Now the sign “FOR HIRE” starts blinking.
Reach the memory location n. 8 by pressing K2 button.
Reaching location n. 8, press K4 button to print out the
contents of both Block 1 and Block 2.
For Hire sign stops blinking and the printer will start.
Press OP button to end the printing procedure and go back to
For Hire position.
