Digitax DBE1100S, Руководство пользователя

Страница: 84 / 96

DigitAx User Guide
Issue code: dgxu4
11-10
b96 At-speed relative/absolute R–W
0 or 1 Def .
val.
1 Res.
Defines the type of signal given by the At-speed
status parameter
b42 .
When b96 is set at 0, absolute is selected.
When b96 is set at 1, relative is selected.
When b96 is set at 1 (relative) the At-speed status
held in b42 is related to the Speed Reference input,
so that b42 = 1 (At speed) when the motor speed is
between the two limits, as follows:
Greater than
[Speed reference]
–
Pr56
Less than
[Speed reference] + Pr57
When b96 is set at 0 (Absolute) the At-speed
status held in
b42
responds to the absolute values
set in
Pr56
and
Pr57
, so that
b42
= 1 (At speed)
when the motor speed speed is between the two
limits, as follows:
Greater than Pr56
Less than Pr57
Refer also to Pr56 , Pr57 and b42 .
b99 Save RAM to EEPROM R–W
0 or 1
Def
.
val.
0 Res.
Saves new parameter values in the
EEPROM
. The
display shows SAVE while parameters are being
saved
.
b99 is related to b1 and b5 .
When b99 is set at 0, no saving occurs.
When b99 is set at 1, parameters are saved.